hooglstealth.blogg.se - Krups expresso machine instructions

KRUPS EXPRESSO MACHINE INSTRUCTIONS MANUALS

Fill the water tank with tepid water and refit it on the appliance, making sure that it is correctly in place.

The type of coffee you choose will determine the strength and taste of your espresso: the finer your ground coffee, the more intense your espresso will be. Do not remove the filter holder while the water is flowing, as the appliance is still under pressure. IMPORTANT! To prevent splashes of hot water, check that the filter holder has been tightened until it stops before preparing the coffee. If the espresso function is used for the first time, the appliance must be cleaned as described in the “FIRST USE” paragraph. Return the selection button (D.1) to the espresso position (D.1.1) (26). Let the water heat for 20 seconds (20) then turn the thumb wheel to position O (D.3.1) to stop the steam (21). When the steam preheating indicator light (D2.2) stops flashing and stays on (18), turn the thumb wheel (D.3) to the right, to the steam function (D.3.3) (19). The selection button (D.1) must be set to the steam position (button depressed) (D.1.2) (16) Place the nozzle into a container filled with water (G.1) (17). Then replace the water tank, ensuring that the cover is closed. The water level should not exceed the “MAX” mark on the tank and should contain at least 300 ml (= equivalent to 2 large cups).

IMPORTANT / After 25 minutes of disuse, your appliance will switch off automatically as a safeguard.

Let approximately 300 ml of water trickle out (change the receptacle if necessary) (14), then turn the thumb wheel to position O (D.3.1) to stop preparation (15).

When the espresso preheating indicator light (D2.1) stops flashing and stays on turn the thumb wheel (D.3) to the left, to espresso preparation (D.3.2) (12-13) – The flow will start after approximately ten seconds.

Place a receptacle under the filter holder (11). Slot the filter holder into place (E) and turn it to the right until it stops (10).

Place a filter without coffee (F1) into the filter holder (F) (9).

The selection button (D.1) must be set to the espresso position – (button not depressed) (D.1.1) (8).On the control panel (D), the “On” indicator light switches on (D2) (7). The water level should not exceed the “MAX” mark on the tank and should contain at least 300 ml (= equivalent to 2 large cups (2-3). Remove the water tank (A) and fill it.To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the espresso machine with hot water, as instructed below:Įnsure you have removed the red protective cap from under the water tank (1). Please read them carefully before using your new appliance. IMPORTANT! the safety instructions are part of the appliance. IMPORTANT! Remove the red protective cap from under the water tank. IMPORTANT! do not place heating elements on the appliance. FIRST USE OR IF THE MACHINE HAS NOT BEEN USED FOR A LONG PERIOD Always ensure the appliance is positioned on a flat and stable surface.

Always make sure the appliance is switched off before removing the tank to fill it or empty it.If you have not used the appliance for more than 5 days, empty and rinse the water tank.Clean off any excess coffee from around the filter holder. Do not fill your filter holder to the brim use the measuring spoon (1 spoon for a 50 ml cup, 2 spoons for 2 x 50 ml cups).Keep the ground coffee in the fridge as this will lock in the flavour for longer.For an intense coffee Choose coffees blended with Robusta – not specifically 100% Arabica – or Italian-roasted coffees or specific Italian-flavoured coffees.For a variety of flavours, try pure origin coffees. Artisan roasted coffees are preferred as they lend a better complexity and delicateness to the flavour. For an aromatic coffee Choose pure Arabica coffees or those composed mostly of Arabica coffee.Type of use: This appliance is designed for DOMESTIC USE ONLY Operating voltage: this appliance is designed to operate at 230 V alternating current only. Accessories: 1 and 2 cup filters, measuring spoon/tamper.D.3.3 Steam preparation TECHNICAL SPECIFICATIONS.D.2.3 Too hot water temperature indicator light.

KRUPS EXPRESSO MACHINE INSTRUCTIONS MANUALS

12.1 Related Manuals / Resources KRUPS XP3208 Pump Espresso And Cappuccino Coffee Maker DESCRIPTION